ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: opt / alt / pdflib-lite / usr / share / doc / alt-pdflib-lite / examples / php

<?php
# $Id: starter_color.php,v 1.1.2.1 2007/12/29 23:26:05 rjs Exp $
# Starter color:
# Demonstrate the basic use of supported color spaces
#
# Apply the following color spaces to text and vector graphics:
# - gray
# - rgb
# - cmyk
# - iccbasedgray/rgb/cmyk
# - spot
# - lab
# - pattern
# - shadings
#
# Required software: PDFlib/PDFlib+PDI/PPS 7
# Required data: none

# This is where the data files are. Adjust as necessary.
$searchpath = "../data";
$outfile = "starter_color.pdf";
$title = "Starter Color";

$y = 800;
$x = 50;
$xoffset1=80;
$xoffset2 = 100;
$yoffset = 70;
$r = 30;

# create a new PDFlib object
$p = PDF_new();

PDF_set_parameter($p, "SearchPath", $searchpath);

# This means we must check return values of load_font() etc.
    PDF_set_parameter($p, "errorpolicy", "return");

if (PDF_begin_document($p, "", "") == 0) {
	die("Error: " . PDF_get_errmsg($p));
    }

PDF_set_info($p, "Creator", "PDFlib Cookbook");
    $buf = $title .  '  $Revision: 1.1.2.1 $';
    PDF_set_info($p, "Title", $buf);

# Load the font
    $font = PDF_load_font($p, "Helvetica", "winansi", "");

if ($font == 0) {
	die("Error: " . PDF_get_errmsg($p));
    }

# Start the page
    PDF_begin_page_ext($p, 0, 0, "width=a4.width height=a4.height");

PDF_setfont($p, $font, 14);

# -------------------------------------------------------------------
    # Use default colors
    #
    # If no special color is set the default values will be used. The
    # default values are restored at the beginning of the page.
    # 0=black in the Gray color space is the default fill and stroke
    # color in many cases, as shown in our sample.
    # -------------------------------------------------------------------

# Fill a circle with the default black fill color
    PDF_circle($p, $x, $y-=$yoffset, $r);
    PDF_fill($p);

# Output text with default black fill color
    PDF_fit_textline($p,
	    "Circle and text filled with default color {gray 0}",
	    $x+$xoffset2, $y, "");

PDF_fit_textline($p, "1.", $x+$xoffset1, $y, "");

# -------------------------------------------------------------------
    # Use the Gray color space
    #
    # Gray color is defined by Gray values between 0=black and 1=white.
    # -------------------------------------------------------------------

# Using setcolor(), set the current fill color to a light gray
    # represented by (0.5, 0, 0, 0) which defines 50% gray. Since gray
    # colors are defined by only one value, the last three function
    # parameters must be set to 0.
    
    PDF_setcolor($p, "fill", "gray", 0.5, 0, 0, 0);

# Fill a circle with the current fill color defined above
    PDF_circle($p, $x, $y-=$yoffset, $r);
    PDF_fill($p);

# Output text with the current fill color
    PDF_fit_textline($p, "Circle and text filled with {gray 0.5}",
	    $x+$xoffset2, $y, "");

# Alternatively, you can set the fill color in the call to
    # fit_textline() using the "fillcolor" option. This case applies the
    # fill color just the single function call. The current fill color
    # won't be affected.
    
    PDF_fit_textline($p, "2.", $x+$xoffset1, $y, "fillcolor={gray 0.5}");

# --------------------------------------------------------------------
    # Use the RGB color space
    #
    # RGB color is defined by RGB triples, i.e. three values between 0 and
    # 1 specifying the percentage of red, green, and blue.
    # (0, 0, 0) is black and (1, 1, 1) is white. The commonly used RGB
    # color values in the range 0�255 must be divided by 255 in order to
    # scale them to the range 0�1 as required by PDFlib.
    # --------------------------------------------------------------------

# Use setcolor() to set the fill color to a grass-green
    # represented by (0.1, 0.95, 0.3, 0) which defines 10% red, 95% green,
    # 30% blue. Since RGB colors are defined by only three values, the last
    # function parameter must be set to 0.
    
    PDF_setcolor($p, "fill", "rgb", 0.1, 0.95, 0.3, 0);

# Draw a circle with the current fill color defined above
    PDF_circle($p, $x, $y-=$yoffset, $r);
    PDF_fill($p);

# Output a text line with the RGB fill color defined above
    PDF_fit_textline($p, "Circle and text filled with {rgb 0.1 0.95 0.3}",
	    $x+$xoffset2, $y, "");

# --------------------------------------------------------------------
    # Use the CMYK color space
    #
    # CMYK color is defined by four CMYK values between 0 = no color and
    # 1 = full color representing cyan, magenta, yellow, and black values;
    # (0, 0, 0, 0) is white and (0, 0, 0, 1) is black.
    # --------------------------------------------------------------------

# Use setcolor() to set the current fill color to a pale
    # orange, represented by (0.1, 0.7, 0.7, 0.1) which defines 10% Cyan,
    # 70% Magenta, 70% Yellow, and 10% Black.
    
    PDF_setcolor($p, "fill", "cmyk", 0.1, 0.7, 0.7, 0.1);

# Fill a circle with the current fill color defined above
    PDF_circle($p, $x, $y-=$yoffset, $r);
    PDF_fill($p);

# Output a text line with the CMYK fill color defined above
    PDF_fit_textline($p,
	    "Circle and text filled with {cmyk 0.1 0.7 0.7 0.1}",
	    $x+$xoffset2, $y, "");

# --------------------------------------------------------------------
    # Use a Lab color
    #
    # Device-independent color in the CIE L*a*b* color space is specified
    # by a luminance value in the range 0-100 and two color values in the
    # range -127 to 128. The first value contains the green-red axis,
    # while the second value contains the blue-yellow axis.
    # --------------------------------------------------------------------

# Set the current fill color to a loud blue, represented by
    # (100, -127, -127, 0). Since Lab colors are defined by only three
    # values, the last function parameter must be set to 0.
    
    PDF_setcolor($p, "fill", "lab", 100, -127, -127, 0);

# Fill a circle with the fill color defined above
    PDF_circle($p, $x, $y-=$yoffset, $r);
    PDF_fill($p);

# Output a text line with the Lab fill color defined above
    PDF_fit_textline($p, "Circle and text filled with {lab 100 -127 -127}",
	    $x+$xoffset2, $y, "");

# ---------------------------------------------------------------
    # Use an ICC based color
    #
    # ICC-based colors are specified with the help of an ICC profile.
    # ---------------------------------------------------------------

# Load the sRGB profile. sRGB is guaranteed to be always available
    $icchandle = PDF_load_iccprofile($p, "sRGB", "usage=iccbased");

# Set the sRGB profile. (Accordingly, you can use
    # "setcolor:iccprofilergb" or "setcolor:iccprofilegray" with an
    # appropriate profile)
    
    PDF_set_value($p, "setcolor:iccprofilergb", $icchandle);

# Use setcolor() with the "iccbasedrgb" color space to set the current
    # fill and stroke color to a grass-green, represented
    # by the RGB color values (0.1 0.95 0.3 0) which define 10% Red,
    # 95% Green, and 30% Blue. Since iccbasedrgb colors are defined by only
    # three values, the last function parameter must be set to 0.
    
    PDF_setcolor($p, "fill", "iccbasedrgb", 0.1, 0.95, 0.3, 0);

# Fill a circle with the ICC based RGB fill color defined above
    PDF_circle($p, $x, $y-=$yoffset, $r);
    PDF_fill($p);

# Output a text line with the ICC based RGB fill color defined above
    PDF_fit_textline($p,
	    "Circle and text filled with {iccbasedrgb 0.1 0.95 0.3}",
	    $x+$xoffset2, $y, "");

# --------------------------------------------------------------------
    # Use a spot color
    #
    # Spot color (separation color space) is a predefined or arbitrarily
    # named custom color with an alternate representation in one of the
    # other color spaces above; this is generally used for preparing
    # documents which are intended to be printed on an offset printing
    # machine with one or more custom colors. The tint value (percentage)
    # ranges from 0 = no color to 1 = maximum intensity of the spot color.
    # --------------------------------------------------------------------

# Define the spot color "PANTONE 281 U" from the builtin color
    # library PANTONE
    
    $spot = PDF_makespotcolor($p, "PANTONE 281 U");

# Set the spot color "PANTONE 281 U" with a tint value of 1 (=100%)
    # and output some text. Since spot colors are defined by only two
    # values, the last two function parameters must be set to 0.
    
    PDF_setcolor($p, "fill", "spot", $spot, 1.0, 0, 0);

# Fill a circle with the ICC based RGB fill color defined above
    PDF_circle($p, $x, $y-=$yoffset, $r);
    PDF_fill($p);

PDF_fit_textline($p,
	    "Circle and text filled with {spotname {PANTONE 281 U} 1}",
	    $x+$xoffset2, $y, "");

# or
    $buf = "fillcolor={spot " . $spot . " 1}";
    PDF_fit_textline($p, "7.", $x+$xoffset1, $y, $buf);

# ----------------------------------------------------------
    # For using the Pattern color space, see the Cookbook topics
    # graphics/fill_pattern and images/background_pattern.
    # ----------------------------------------------------------

# ---------------------------------------------------------
    # For using the Shading color space, see the Cookbook topic
    # color/color_gradient.
    # ---------------------------------------------------------

PDF_end_page_ext($p, "");

PDF_end_document($p, "");

$buf = PDF_get_buffer($p);
$len = strlen($buf);

header("Content-type: application/pdf");
header("Content-Length: $len");
header("Content-Disposition: inline; filename=hello.pdf");
print $buf;
?>

[-] chartab.php [edit]
[+] examples.php5
[-] starter_pvf.php [edit]
[-] businesscard.php [edit]
[-] starter_textline.php [edit]
[-] invoice.php [edit]
[-] starter_textflow.php [edit]
[-] readme.txt [edit]
[-] starter_pdfmerge.php [edit]
[-] starter_block.php [edit]
[-] starter_graphics.php [edit]
[-] quickreference.php [edit]
[-] starter_color.php [edit]
[-] starter_pdfx.php [edit]
[-] hello.php [edit]
[+] ..
[-] starter_basic.php [edit]
[-] starter_image.php [edit]
[-] pdfclock.php [edit]
[-] starter_webform.php [edit]
[-] starter_pdfa.php [edit]
[-] starter_tagged.php [edit]
[-] starter_type3font.php [edit]
[-] starter_table.php [edit]
[-] starter_layer.php [edit]
[-] starter_3d.php [edit]
[-] starter_pcos.php [edit]
[-] image.php [edit]